BBS水木清华站∶精华区

发信人: November (长夜漫漫无心睡眠+猪呀~两头), 信区: Linux
标  题: Re: 设置声卡的问题
发信站: BBS 水木清华站 (Mon May  3 17:05:41 1999) WWW-POST

【在 arctic (Ken) 的大作中提到: 】
∶ 我的声卡：
∶         YAMAHA opl3-SA3
∶         与Sound Blaster等兼容，与MSS兼容，
∶         可是我总是设置不好，
∶         （设置完，测试时候出现“/dev/audio出错”）
∶         盼高手解决！

你的声卡和我的一样，我在TL下安装成功，以下是自己的一些心得：

It cost me much time and tank's help to understand the installation of PnP
soundcard, and I have correctily install my OPL-SA2 PnP soundcard!! It works
very well now.

Prerequisite:
1. TurbonPnPcfg Package installed.
2. The .o of your soundcard in /lib/modules/[version]/misc founded.
3. Your PnP soundcard works ok in other OS like win9x or win NT.
4. Compile your kernel using your soundcard support <Module>, and perhaps the
sound support <Module>.
5. Of course, you must make the kernel support the PnP(Using * will be
good).
6. Install your new kernel.

Installation:
1. Bootup with your new kernel, login as root.
2. Use turbopnpcfg/turbopnp to probe, config and activate your PnP
soundcard.
3. See the file: /etc/isapnp.conf to get the soundcard's IOs, IRQ and DMAs.
Since your kernel support PnP, your soundcard will be activated as the
setting in /etc/isapnp.conf next time the T.L. boot up.
4. Use "modprobe yourcard.o io=... irq=... dma=... ..." to set up your
soundcard in T.L.. For OPL3, there should add "mssio=... "The io... setting
is list in the /etc/isapnp.conf file.
5. Use "cat /dev/snstat" and "lsmod" to see whether soundcard has bee
installed. And use "cat *.au > /dev/audio" to play sample sound to your
soundcard.
6. when successfully install your s.c., write your autoprobe modules like
this:
alias sound yourcard(yourcard.o - .o)
options -k yourcard io=... irq=... ....
   and the OS will autoprobe the sound for you when boot up.
7. Installation complete.

--
少年维特摇了摇头，惆怅地转过身去。小河中轻轻泛起的涟漪，正如印象里兰花般的笑。

※ 来源:·BBS 水木清华站 bbs.net.tsinghua.edu.cn·[FROM: 202.112.3.85]